-55℃-110℃/99.9W/33V/3A Thermometer Voltmeter Ammeter 4 Digit LED Dual Display

  • Item ID #300092
Qty.:

List Price: $18.29 Our Price: $12.42Save 32%

Price(per unit)
1-4
$12.42		 5-9
$11.80		 10-29
$11.18		 30-49
$10.56		 50+
$9.94
Buy More: please contact us

It is a Temp Power Volt Current Multimeter,Power Supply: 3.5-28V DC 12V,Temperature range: -55 °c - 110 °c (resolution 0.1 °c),Power meter range: DC 0.0-99.9W (resolution 0.1W),Voltage range: DC 0.00-33.00V (resolution 0.01V),Current meter range: automatic precision variable DC 0-999.9mA-3.000A.


Other Products in 3 in 1 Meter

page 1 of 2 Previous Page Next Page


Technical parameters:

  • Dimensions: 48 * 29 * 21 mm
  • Cutting size:45mm*26 mm
  • Power Supply: 3.5-28V DC 12V
  • Temperature range: -55 °c - 110 °c (resolution 0.1 °c)
  • Power meter range: DC 0.0-99.9W (resolution 0.1W)
  • Voltage range: DC 0.00-33.00V (resolution 0.01V)
  • Current meter range: automatic precision variable DC 0-999.9mA-3.000A
  • Accuracy: ± (0.3% +2 digits)
  • Refresh rate: about 200ms / times
  • Display: 0.28-inch 4 digit dual LED digital tube
  • Display Color: Red+Green


Display and operating instructions:
  • Voltage Current Meter Mode: The default mode voltage current meter.
  • Thermometer power meter mode: press the switch again to switch to the thermometer power meter mode
  • Top of the display is the measured voltage, below is the measured current. When measuring current, the power from the measuring circuit.
  • Top of the display is the measured temperature, displays *** C; below is the measured power, displays *** P. Without 18B20 chip, it displays -N-C; When the temperature exceeds the range, it displays --- C; If the power out of range, it displays --- P.
  • Alternate display mode: press switch once again, the two display mode will alternately change (press again to return to the voltage current meter mode)
  • State memory mode: Long press the switch more than 1s, the device will set the current display mode as the default boot mode.

Wiring:
  • Red thin wire (VCC): power supply+
  • Note: If the measured signal is lower than 28V and have abundant power supply, can be directly used as a power supply module (the thin yellow line and the thin red line parallel use)
  • Black thin wire(GND): power supply -, Measurement signal -
  • Yellow thin wire (VIN): Measurement signal+
  • Red thick wire (I+):Current input+ (connect with load negative)
  • Black thin wire(I-):Current input-(in series in power supply negative)

Package include:
  • 1x Temp Power Volt Current Multimeter
  • 1x 18B20 temperature sensor chip


Reviews

* Required information
Choose a ranking for this item. 1 star is the worst and 5 stars is the best.
NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed