Digital Meter AC 80~300V 100A Digital Voltmeter/Ammeter Multifunction Display Panel Meter/Tester/Monitor/Panel Meter

Features:

• 6-IN-1 MULTIMETER: detect and display voltage, current, active power, battery electric energy, power frequency and power factor on one interface.
• MEASUREMENT RANGE: voltage AC 80.0~300.0V; current 0~100A; power 0~30000W; Electric energy 0~99999kwh; frequency 45.0Hz~65.0Hz; power factor 0.00~1.00PF.
• DISPLAY: digital LCD color display.
• DATA AUTO STORAGE: when power off, the electric energy data will be stored and memorized automatically, can be reset.
• NOTE: this meter can only be used for measuring 50-60Hz pure AC city electricity, it will be damaged if used to measure square wave, inverter output or modified sine wave circuit.

• Measuring parameter: voltage, current, active power, battery electric energy, power frequency and power factor.
• Voltage Measuring Range: AC 80.0~300.0V
• Current Measuring Range: AC 0~99.99A
• Resolution: 0.01A, display 100.0A when over 100A.
• Active Power Measuring Range: 0~30000W
• Resolution: 0.1W (0~9999.9W); 1W (10000W~30000W)
• Electric Energy Measuring Range: 0~99999kwh
• Resolution: 0.01kwh (0~999.99kwh); 0.1kwh (1000.0~9999.9kwh); 1kwh (10000.0-99999kwh)
• Power Frequency Range: 45.0Hz~65.0Hz
• Power Factor Range: 0.00~1.00PF
• Measuring Accuracy: 1% ± 2 digits
• Measuring Speed: 2 times per second
• Outside Dimension: 79*43*48mm/3.1*1.7*1.9in
• Installation Dimension: 76*39mm/2.9*1.5in
• Screen Dimension: 52*26mm/2*1in
• Current Transformer (CT) Hole Diameter: 15.5mm/0.6in

• Working Temperature: -10～+50℃
• Working Humidity: 10~80% (no condensation)
• Working Pressure: 80~106kPa
• Sunlight: No direct exposure
• Data Storage & Reset Function:
• Storage Function: Automatically save the accumulated electric energy value when power off.
• Reset Function: Long press the reset button for 5 seconds, the accumulative electricity will be reset to be 0.

• 1. Connect the green wire of the CT(current transformer) to the BLUE terminal of the meter.
• 2. Pass the wire of the circuit to be measured through the hole of the CT, and then connect it to the green terminal.
• 3. After power on, the screen will display the measured data.

• 1. The multimeter can only work on AC 50-60Hz pure mains supply. Do not use it to measure square wave, inverter output or corrected sine waves circuits, otherwise the product will be damaged.
• 2. Do not wrongly exchange the wiring of voltage input(green terminal) and current transformer(blue terminal), otherwise the product will be damaged.
• 3. Do not squeeze the LCD screen when installing the multimeter, otherwise the screen will display gibberish or broken codes.

• 1 x AC Display Meter ( Digital Meter/Tester/Panel Meter )